Power Energy Saver Advice - Gas Savings

Author: Bernie Mueller

Erratic driving burns gas in an unfortunate way. To save gas, you might want to cut back on that habit. Learn to drive more steadily, will you? And try not to be so in a hurry all the time. If you must be somewhere, try to leave an hour ready so that you can get there without speeding unnecessarily. Your car and your wallet are saved in the same breath.

When you allow your automobile engine to work at its own pace, youll save gas all the time. So, don't push your engine too hard, will you? Feel it like you would feel a lover and let the car find its own balance as you gradually cruise over the distances you have to cover. Your bank account will testify in no time at all.



After you have been driving your car for a couple of months, you should have it checked out at the mechanics. Some wear is bound to have set it, and it would be causing you to burn more gas. If you can care for your car this way, it will care better for you by saving gas.

When you find yourself in a traffic hold up, you might want to turn off your engine. If you keep the engine running, youll be wasting gas, and that is not a good thing because your bank account can only sweat so many times before it gives out and you are in debt. The moment you find you are going to be held up longer than a few seconds, switch the engine off.

When you drive, you dont want to have to come to a stop all of a sudden. I don't know anything that burns gas quite as badly. You have to start up building your speed again, which is never flattering for your engine.

If you've found this article of value then you will in all likelihood be interested to read how you can also trim your electricity bill. I strongly recommend that you visit my favorite 'save electricity' web site Plug and Save which provides first-rate power saving products and information that will instantly lower your electricity bill.

Source: http://www.articlealley.com/article_1187919_45.html

Read more at http://www.articlealley.com/article_1187919_45.html?ktrack=kcplink

MacBook Energy Saver Tips: Conserving the Battery of your MacBook

Author: Heide Lynne Canlas

If you want to conserve the battery of your MacBook and want to make it last longer than usual, change the settings of your MacBook to Energy Saver mode. To do this, follow the step by step guide given below. This should conserve the battery of your MacBook, especially when you are out and away from any power outlet:



1. At the top right of your screen, you will see a battery gauge. Click on it.

2. As the menu displays, select which Apple energy setting you want to use. And because you want to conserve the battery of your Macbook and get its longest life, choose the Better Energy Savings option.

3. If you want to customize the configuration of your MacBook's Energy Settings, click on Open Energy Saver, still from the menu displayed. The Energy Saver preference window will then open.

4. From the Settings for: dropdown menu, choose Battery to allow energy settings configuration whenever you use your MacBook on battery power.

5. From the Optimization dropdown menu, choose Custom. The window should expand and display more preferences to configure.

6. On the Sleep tab, you will see two sliders - one allows you to set the time before the computer is put to sleep, while the other allows you to set the time before the display is put to sleep. As a general rule, the shorter the time you set for both sliders (or the more to the left you set the slider), the longer life the battery of your MacBook gets.



7. Also, check the box that says ‘Put the hard disk(s) to sleep when possible' to conserve power.

8. On the Options tab, choose more options that will increase the battery life of your MacBook. Check the boxes that say:

- Slightly dim the display when using this power source
- Automatically reduce the brightness of the display before display sleep

9. For more ways to conserve the battery life of your MacBook, you can manually reduce its brightness using the F1 on the keyboard, especially when you don't need too much lighting on your screen. Also, make sure to turn off Wi-fi, Bluetooth, and other networking features of your MacBook when not in use.

Keeping these guidelines in mind, you should be able to conserve the battery of your MacBook and use it for hours. Remember, it is always best to care for your laptop's battery to maintain its functional performance so that you won't have to have it repaired on Apple stores every time it gets damaged due to improper use or overuse.

Source: http://www.articlealley.com/article_1141164_10.html

Read more at http://www.articlealley.com/article_1141164_10.html?ktrack=kcplink

Halogen Lamps Is A Great Energy Saver

Author: MIKE SELVON

Nowadays, an increasing number of people are trying to find ways to maintain a good standard of lifestyle while also trying to be more "green" and responsible, with regard to being energy efficient in their homes. Light bulbs are in every home across the country, and because they are so prevalent, one great way to save energy and be "green" is to replace standard incandescent bulbs with halogen lamps, which use less electricity.

Halogen light bulbs provide more output for the amount of energy they consume, over other typically used bulbs. They are now used in homes, offices and even vehicles these days.



One of the reasons why halogen bulbs were originally developed was to address the issue of the short life span of typical incandescent bulbs. The development of the halogen type bulbs was very successful and nowadays the halogen lamps have a great reputation for being energy efficient in addition to having a very long life span. These factors have helped to make them a favorite option to standard bulbs.

Many times people refer to halogen bulbs as tungsten halogen light bulbs. This is because it is the interaction of the component of tungsten with the halogen that produces the brilliant light that is one of the hallmarks of halogen lighting fixtures. A halogen light bulb is made from a clear glass capsule that is filled with a halogen gas, such as iodine, along with a tungsten element and then it is sealed.

One of the interesting things that happen when a tungsten halogen bulb is lit is that minute pieces of the tungsten metal element will "evaporate" during the process of the light being produced. These tiny pieces of the metal are deposited within the capsule as hotspots and this factor actually helps to extend the life of the halogen lamp. This in turn means that halogen bulbs can operate at higher temperatures than incandescent bulbs, producing brighter light with the same amount of energy usage, making them more efficient.



During this chemical reaction that occurs in a halogen bulb the sealed capsule becomes extremely hot, which means that the typical type of glass used in other types of lighting fixtures cannot be used because it cannot withstand such intense temperatures. Instead of traditional glass, fused quartz is used to make the capsule for tungsten halogen light bulbs because it can stand up to the temperatures that are generated.

Halogen light bulbs are used in many different types of halogen lamps, including desk lamps, table lamps and floor lamps. They can be found in a wide variety of styles as well. Those who are looking for lighting fixtures that provide a lot of bright light, have a long life and use a relatively small amount of energy should definitely look at the options that they have for halogen lighting for their home or office.

A free gift awaits you at our portal site, where you can enrich your knowledge further about halogen lamps. Your comment is much appreciated at our unique lamps/a> blog.

Source: http://www.articlealley.com/article_706833_27.html

Read more at http://www.articlealley.com/article_706833_27.html?ktrack=kcplink